Sharp LC-26SH7E User Manual

Quick guide
Initial installation overview
Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
Preparation
 Connect antenna cable to
the antenna terminal.
75Ω
 If necessary, insert CA card
into the CI slot to watch
scrambled broadcasts.
 Connect the AC cord to the
TV.
1
Power on and run the
auto installation
 Turn on the TV power with
a.
MENU
 Run the initial auto
installation.
Initial Setup
WELCOME!
Welcome to use the Wizard for
Initial Setup !!
Please press [OK] to start the wizard.
Next
OK
4 Language setting
Initial Setup
Language
Please select your language:
Deutsch
Français
Italiano
Español
Português
Nederlands
NextSelectBack
English
ExitEXIT
4 Country setting
Initial Setup
Country
Please select your country:
NextSelectBack
Belgium
Switzerland
Czech Republic
Germany
Denmark
Spain
Austria
ExitEXIT
2
4 Start searching channels
Initial Setup
Channel Scan
First, please connect antenna.
Start channel scan now?
If you skip this setup, the channel
scan could be performed in Menu.
NextSelectBack
Skip Scan
0 %
Scan
ExitEXIT
Initial Setup
Channel Scan
The channel scan may take a while
to complete.
Status: Scanning.
Analogue Channels: 3
Digital Channels: 10
10 %
CancelEXIT
Watch TV
 Congratulations! Now you
can watch TV.
Initial Setup
Channel Scan
Congratulations !!
Completed Initial setup
Please press [OK] to exit the
wizard.
Back
Exit
OK
 If necessary, adjust the
antenna to attain maximum
signal reception.
3
AC cord (x1)
Product shape
varies in some
countries.
7

Sharp LC-26SH7E Specifications

General

Comb filter	Digital
Display diagonal	26 \
Display brightness	450 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	150 °
Contrast ratio (dynamic)	8000:1
Contrast ratio (typical)	800:1
Viewing angle, horizontal	160 °
Power requirements	220 - 240V AC, 50 - 60Hz
Headphone connectivity	3.5 mm
SCART ports quantity	2
Digital audio coaxial out	1
Product color	Black
Panel mounting interface	200 x 100 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	55 W
RMS rated power	10 W
Tuner type	Analog & digital

Weight and Dimensions

Depth (with stand)	239.8 mm
Width (with stand)	657.8 mm
Height (with stand)	491.1 mm
Weight (with stand)	8400 g
Depth (without stand)	91.6 mm
Height (without stand)	448.4 mm