To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Sharp LC-48CFE4042E and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 48 \ |
| Display brightness | 300 cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Contrast ratio (dynamic) | 1000000:1 |
| Display diagonal (metric) | 121 cm |
| Motion interpolation technology | AMR (Active Motion Rate) 100 |
| 3D | No |
| Annual energy consumption | 96 kWh |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC, PAL |
| Digital signal format system | DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2 |
| Audio decoders | Dolby Digital, DTS TruSurround |
| RMS rated power | 16 W |
| Number of speakers | 2 |
| On/off switch | - |
| Product color | Black |
| Panel mounting interface | 400 x 400 mm |
| Audio formats supported | AAC, AC3, EAC3, LPCM, M4A, MP3 |
| Image formats supported | BMP, JPEG, JPG, PNG |
| Video formats supported | ASF, AVI, FLV, H.264, H.265, HEVC, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, TS, WMV |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 1 |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Power consumption (max) | 110 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 95 W |
| Power consumption (PowerSave) | 66 W |
| Certification | CE, ErP, CB |
Weight and Dimensions| Depth (with stand) | 230 mm |
|---|---|
| Height (with stand) | 691.8 mm |
| Weight (with stand) | 14700 g |
| Depth (without stand) | 91.9 mm |
| Width (without stand) | 1097.6 mm |
| Height (without stand) | 644.6 mm |
| Weight (without stand) | 11700 g |
