Sharp LC-48CFE4042E User Manual

50
6.5 Factory Setting Upgrading
Press <MENU>+1147 to enter the factory setting, search for the “Upgrade” item by the remote
control, just like the picture below, then you can follow the steps in the screen.
6.6 ISP Upgrading
A Prepare tools
Note: The middle two lines of 4pin cable should be crossed, or connection will fail.
Serial port board: B.CNSISP7A
USB extension cord
VGA Upgrade board 4PIN converted cable

Sharp LC-48CFE4042E Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	48 \
Display brightness	300 cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Contrast ratio (dynamic)	1000000:1
Display diagonal (metric)	121 cm
Motion interpolation technology	AMR (Active Motion Rate) 100
3D	No
Annual energy consumption	96 kWh
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Audio decoders	Dolby Digital, DTS TruSurround
RMS rated power	16 W
Number of speakers	2
On/off switch	-
Product color	Black
Panel mounting interface	400 x 400 mm
Audio formats supported	AAC, AC3, EAC3, LPCM, M4A, MP3
Image formats supported	BMP, JPEG, JPG, PNG
Video formats supported	ASF, AVI, FLV, H.264, H.265, HEVC, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, TS, WMV
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	110 W
Power consumption (standby)	0.5 W
Power consumption (typical)	95 W
Power consumption (PowerSave)	66 W
Certification	CE, ErP, CB

Weight and Dimensions

Depth (with stand)	230 mm
Height (with stand)	691.8 mm
Weight (with stand)	14700 g
Depth (without stand)	91.9 mm
Width (without stand)	1097.6 mm
Height (without stand)	644.6 mm
Weight (without stand)	11700 g