Sharp LC-50LB150U User Manual

44
Sharp 50" LED TV
www.sharpusa.com
• Overscan—Extends text and images past
the screen edges to hide edge artifacts.
You can select On or Off.
• Active Backlight—Enhances the contrast
ratio between light and dark areas of the
picture. You can select On or Off.
• Motion Enhancement—Reduces motion
blur and eliminates film judder with clear
detail and smooth motion. You can select
Off, On (Low), On (High), or Film Mode.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Off, Low, Middle, or
High.
• Active Contrast—Automatically adjusts
picture detail and brightness. You can
select On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting the power on picture mode
You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETUP, then press T or
ENTER. The SETUP menu opens.
3 Press
S or T to highlight Reset All, then press
ENTER. The SETUP · RESET ALL menu opens.
4 Press
S or T to highlight Power on in Dynamic
Mode, then press ENTER.
5 Press
S or T to highlight On (when you turn on
your TV, it will be in Dynamic picture mode) or
Off (when you turn on your TV, it will be in the
picture mode it was in before you turned it off),
then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Sharp LC-50LB150U Specifications

General

Brand	Sharp
Model	LC-50LB150U
Category	LED TV
Language	English