Sharp LC-M3700 User Manual

29
US
Connection
and Installation
Bundling Cables
■ Cables and cords connected to the back of the monitor can be bundled using the supplied
cable clamp and cable binders. This will prevent stray or disorganized cables at the back of
the monitor.
Cable binder
To external devices
Bundle of cables
Wrap the cable binder
around the bundle of
cables.
Put the thinner end of
cable binder through
the hole as shown, and
tighten appropriately.
"Rear view
Cable binder
To external devices
Bundle of cables
Wrap the cable binder
around the bundle of
cables.
Put the thinner end of
cable binder through
the hole as shown, and
tighten appropriately.
"With terminal cover closed
How to use the supplied terminal cover mounting screws and flat washers
» Use terminal cover mounting screws to firmly fix the terminal cover if difficult to close after
bundling the cables.

Sharp LC-M3700 Specifications

General

Brand	Sharp
Model	LC-M3700
Category	Monitor
Language	English