Sharp R-24AT User Manual

9
NUMBER
POWER
%
2
NUMBER
POWER
%
1
MEMORY CHECK
Step
Action
2
Select check mode.
1
Cancel check mode.3
CHECKING THE MAGNIFICATION FACTOR FOR DOUBLE QUANTITY
* Example: If you want to know the magnification factor for double quantity in MEMORY 1. (1.67 is
programmed.)
Step
Action
1
2
3
Select double quantity cooking mode.
Select check mode.
Cancel check mode.4
Note: Magnification factor 1.80 for the double quantity is stored in all memories unless changed.
You can check the information programmed into the memory.
CHECKING TIME AND POWER LEVEL
* Example: If you want to know the information that you have programmed into memory 1, this memory has been
programmed for 4 minutes at 60% as the 1st sequence and 2 minutes at 30% as the 2nd sequence.
DisplayPress pad
NUMBER
CHECK
CHECK
CHECK
CHECK
DisplayPress pad
CHECK
1
1
DOUBLE
QUANTITY
CHECK
NUMBER
DOUBLE
NUMBER
CHECK
DOUBLE
NUMBER
CHECK
Select memory number.
1
Note: When is displayed at Step 2, the memory is not set.
Select memory number.
1
Repeat
Downloaded from: http://www.usersmanualguide.com/

Sharp R-24AT Specifications

General

Turntable	-
Clock type	Electronic
Door hinge	Left
Control type	Buttons
Product color	Stainless steel
Door open type	Pull-out
Microwave power	1900 W
Built-in display	Yes
Appliance placement	Countertop
Number of power levels	11
Auto programs quantity	10
Current	13 A
Connected load	2900 W
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	470 mm
Width	510 mm
Height	335 mm
Weight	33000 g
Interior dimensions (W x D x H)	330 x 330 x 180 mm