Sharp R-24AT User Manual

SHARP ELECTRONICS (U.K.) Ltd
Manchester, U.K.
Locall 0345 125387
TINSEA821WRR0-K02
recycled paper
Printed in Japan.
ALLING FOR SERVICE
C
• This oven complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC.
• As part of a policy of continuous improvement,
we reserve the right to alter design and
specification without notice.
• No part of this publication may be reproduced,
stored in a retrieval system or transmitted in any
form, electronic, mechanical, photocopied,
recorded, translated or other means without prior
permission from SHARP Electronics (U.K.) Ltd.
• The illustrations, technical information and data
contained in this publication to our best
knowledge, were correct at the time of going to
print. The right to change specifications, at any
time, without notice, is reserved as part of our
policy of continuous development and
improvement.
• If you are unable to resolve a problem using the checks
covered on the last few pages, do not attempt to service
this microwave oven yourself.
• Contact the dealer or supplier from whom the oven was
purchased in order to obtain service. Where this is not
possible, please contact either Sharp Electronics (U.K.) Ltd.
Telephone: 0345 125387 (Lo-Call) or RH Hall (Micro-
wave) Ltd. Telephone: 01442 875578
• For general information & assistance with oven queries,
please contact either Sharp Electronics (U.K.) Ltd.
Telephone: 0345 125387 (Lo-Call) or RH Hall (Micro-
wave) Ltd. Telephone: 01442 875578
SPECIFICATIONS:
AC Line voltage ............................................. Single phase 230-240V, 50Hz
AC Power required ........................................ R-24AT : 2.9kW
R-22AT : 2.4kW
Output power ................................................ R-24AT : 1900W (IEC 60705)
R-22AT : 1500W (IEC 60705)
Microwave frequency .................................... 2450MHz* (Class B/Group 2)
Outside dimensions ...................................... 510(W) x 335(H) x 470(D) mm (Single)
510(W) x 670(H) x 470(D) mm (Two ovens stacked)
Cavity dimensions ......................................... 330(W) x 180(H) x 330(D) mm
Oven capacity ............................................... 0.7 cu.ft (20 litres)
Cooking uniformity ........................................ Rotary antenna system
Weight ........................................................... Approx. 33kg
* This is the classification of ISM (Industrial Scientific and Medical) equipment described in the
International Standard CISPR 11.
• Replacement parts and accessories may be
obtained from either Sharp Electronics (U.K.) Ltd.
Telephone: 0345 125387 (Lo-Call) or RH Hall (Micro-
wave) Ltd. Telephone: 01442 875578
WARNING:
For your own safely, certain microwave oven
parts must be replaced by a qualified Engineer
appointed by SHARP, these are, therefore,
unavailable to customers.
!
Downloaded from: http://www.usersmanualguide.com/

Sharp R-24AT Specifications

General

Turntable	-
Clock type	Electronic
Door hinge	Left
Control type	Buttons
Product color	Stainless steel
Door open type	Pull-out
Microwave power	1900 W
Built-in display	Yes
Appliance placement	Countertop
Number of power levels	11
Auto programs quantity	10
Current	13 A
Connected load	2900 W
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	470 mm
Width	510 mm
Height	335 mm
Weight	33000 g
Interior dimensions (W x D x H)	330 x 330 x 180 mm