Sharp SMC1162HS User Manual

SETTING THE CLOCK
When the oven is rst plugged in, the display will show “0:00” and a tone will sound. If the AC power ever goes
C O N T R O L S
KITCHEN TIMER MODE
Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after cooking.
However delay cooking cannot be programmed for defrost. Timer operates without microwave energy.
The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER mode. When
KITCHEN TIMER mode ends, you will hear 5 beeps.
CLOCK
2) Press the number keys to program current time. For example, to set the
" 1,0,1,2
.
CLOCK " to finish clock setting. ":" will flash and the clock will be lit.
until valid numbers are input.
selected within 1 minute, the oven will go back to the previous setting automatically.
STOP/C
," "00:00" will display.
"
(1) Press "
(
clock to 10:12, press
(3) Press "
(4) If the numbers are not within the range of 1:00-12:59, the setting will be invalid
Note:
1. In the process of clock setting, if the "
2. If the clock needs to be reset, repeat steps 1- 3.
off, the display show “ 0:00” when the power comes back on.
Press the number keys and enter the timer time. (The maximum cooking time is 99 minutes and
99 seconds)
START/+30SEC. " to confirm setting.
2. When using the kitchen timer, o other program can be set.
KITCHEN TIMER ," display will show 00:00 , the first hour figure flashes.
" "
.
n
(1) Press "
(2)
(3) Press "
(4) When the timer time arrives, the buzzer will beep 5 times. If the clock is set, the LED will display the
Note: 1. The kitchen timer is a timer and will not display the "Clock."
current time.
or
to set
the
clock at
5:12,
press
"0,5,1,2"
LEAR" button is pressed or if there is no operation
12

Sharp SMC1162HS Specifications

General

Brand	Sharp
Model	SMC1162HS
Category	Microwave Oven
Language	English