EasyManuals Logo

Shindaiwa T242 User Manual

Shindaiwa T242
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
T242 Trimmer
A
B
C
E
D
General Maintenance
IMPORTANT!
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS
MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY
REPAIRS MUST BE PERFORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY ECHO
INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO
AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM
AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.
NOTE:
Using non-standard replacement parts could invalidate your Shindaiwa warranty.
WARNING!
Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit
to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
Non-standard accessories, cutting attachment, or replacement parts may not operate properly with your
unit and may cause damage and lead to personal injury.
Mufer
This unit must never be operated with a faulty or missing spark arrester or mufer. Make sure the mufer
is well secured and in good condition. A worn or damaged mufer is a re hazard and may also cause
hearing loss.
Spark Plug
Keep the spark plug and wire connections tight and clean.
Fasteners
Make sure nuts, bolts, and screws (except carburetor adjusting screws) are tight.
Daily Maintenance
Prior to each work day, perform the following:
1. Remove dirt or debris from the engine (A).
Check air lter (B) and cooling ns (C) for
clogging and clean them as necessary.
2. Carefully remove any accumulation of dirt or
debris from the mufer (D) or the fuel tank
(E). Dirt build-up in these areas could cause
engine overheating, induce premature wear,
or create a re hazard.
3. Check for loose or missing screws or
components. Make sure the cutting
attachment is securely fastened.
4. Check the entire unit for leaking fuel or
grease.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shindaiwa T242 and is the answer not in the manual?

Shindaiwa T242 Specifications

General IconGeneral
Engine Displacement23.9 cc
Dry Weight4.5 kg
Engine Type2-Stroke
Shaft TypeStraight
Starter SystemRecoil
Weight (kg)4.5 kg
Shaft Length59 inches
Fuel Capacity (L)0.47

Related product manuals