Siemens EQ.5 Extra Class User Manual

29
en
Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for
optimal performance� The appliance
switches off automatically after a specic
time (time span can be programmed, see
“Menu settings” Shut off)�
Exception: The appliance switches off
without rinsing if only hot water or steam
were dispensed�
To switch the appliance off manually before
this, press the k off / i button (13)�
The appliance rinses and switches off�
N.B.: If the appliance is being used for the
rst time, a service program has been run,
or the appliance has not been operated
for a long period, the rst beverage will
not have the full aroma and should not be
consumed�
When using the espresso machine for the
rst time, you will achieve a suitably thick
and stable “crema” only after the rst few
cups have been dispensed�
After extended use, water droplets may
form on the ventilation slots� This is normal�
Water lter
A water lter can prevent scale buildup.
Before a new water lter is used, it must be
rinsed. To do this, proceed as follows:
● Press the water lter rmly into the
water tank with the aid of the measuring
spoon (19)�
● Fill the water tank (17) with water up to
the max mark�
● Press and hold the k off / i button (13)
for at least three seconds� The menu
opens�
● Press the k off / i button (13) repeatedly
until the display shows No/Oldfilter�
● Select Activate filter with the upper
rotary knob (15)�
● Press the start button (10)�
● Place a receptacle with a capacity of
0�5 litres under the outlet (6a)�
● Press the start button (10)�
● Water will now ow through the lter to
rinse it�
● Empty the container�
The appliance is ready to use once more�
Note: Rinsing the lter simultaneously
activates the setting for the Change filter!
display�

Siemens EQ.5 Extra Class Specifications

General

Brand	Siemens
Model	EQ.5 Extra Class
Category	Coffee Maker
Language	English