Siemens IQ300 SN93HX60CG User Manual

en Basic settings
34
Basic setting Display text Selection Description
SideLight I01
1
I00 - I01 While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch SideLight on "I01" or off
"I00".
Tone volume b02
1
b00 - b03 Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Childproof lock c00
1
c00 - c01 Switch the
→"Electric childproof lock",
Page11 on or off.
Level "c00" switches the childproof
lock off.
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Remote Start rc1
1
rc0 - rc2 Activate or deactivate
→"Remote Start ", Page36.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page36
¡ With the setting "rc2", the func-
tion is permanently activated.
Factory setting rE Start with
YES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Open the appliance door.
2. Press ⁠.
3. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows ⁠.

Siemens IQ300 SN93HX60CG Specifications

General

Type	Freestanding
Energy Efficiency Class	C
Capacity	13 place settings
Noise Level	44 dB
Water Consumption per Cycle	9.5 liters
Dimensions (HxWxD)	84.5 x 60 x 60 cm
Number of Programs	6
Child Lock	Yes
Programs	Eco, Auto, Intensive
Delay Start	Yes