Siemens IQ300 SN93HX60CG User Manual

en Cleaning and servicing
38
Phase Removal of Detergent Placement
2 Food remnants and de-
posits
Machine cleaner Detergent dispenser
To ensure optimum cleaning perform-
ance, the programme doses the de-
tergents independently of each an-
other during the relevant cleaning
phase. Correct placement of the de-
tergents is necessary here.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if ad-
vised to do so by the display. The in-
dicator will go out after you have run
Machine Care. If your appliance does
not have a reminder function, we re-
commend performing Machine Care
every 2months.
Running Machine Care
Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.
Notes
¡ Run the Machine Care programme
without any tableware in the dish-
washer.
¡ Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡ Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡ For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.
¡ Follow the safety instructions given
on the packagings of the machine
care products and machine clean-
ers.
1. Remove any coarse soiling in the
interior with a damp cloth.
2. Clean the filters.
3. Place the machine care product in
the appliance interior.
Only use machine care products
specially designed for dishwash-
ers.
4. Pour the machine cleaner into the
detergent dispenser until it is filled
completely.
Do not place any additional ma-
chine cleaner in the appliance in-
terior.
5. Press ⁠.
6. Press ⁠.
a Machine Care is run.
a Once the programme has ended,
the indicator for Machine Care
goes out.
Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter

Siemens IQ300 SN93HX60CG Specifications

General

Type	Freestanding
Energy Efficiency Class	C
Capacity	13 place settings
Noise Level	44 dB
Water Consumption per Cycle	9.5 liters
Dimensions (HxWxD)	84.5 x 60 x 60 cm
Number of Programs	6
Child Lock	Yes
Programs	Eco, Auto, Intensive
Delay Start	Yes