Siemens iQ300 WM12N280HK User Manual

Basic operation en
39
13.10 Adding laundry
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
1. Press ⁠ Start / Reload.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2. Add or remove laundry.
3. Close the door.
4. Press ⁠ Start / Reload.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
1. Press ⁠ Start / Reload.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high: Start
the ⁠ Spin or Drain pro-
gramme.
3. Remove the laundry.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Set the ⁠ Spin or Drain pro-
gramme.
2. Press ⁠ Start / Reload.
13.13 Unloading the laundry
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
1. Open the door.
2. Remove the laundry.

Siemens iQ300 WM12N280HK Specifications

General

Load Capacity	8 kg
Energy Efficiency Class	A+++
Spin Speed	1200 rpm
Noise Level (Spin)	74 dB
Dimensions (H x W x D)	84.8 x 59.8 x 55 cm
Weight	69 kg
Color	White
Programs	Wool