Siemens REV17 Series User Manual

2 / 13
Siemens Room temperature controller REV17.. CE1N2203en
Building Technologies 24.04.2008
Function
• PID control with self-learning or selectable switching cycle time
• 2-point control
• 7-day time switch
• Remote control
• Preselected 24-hour operating modes
• Override function
• Holiday mode
• Party mode
• Frost protection mode
• Information level to check settings
• Reset function
• Sensor calibration
• Minimum limitation of setpoint
• Periodic pump run
Protection against valve seizure
• Synchronization to radio time signal from Frankfurt, Germany (REV17DC)
Type summary
Room temperature controller with 7-day (weekday/weekend) time switch REV17
Room temperature controller with 7-day (weekday/weekend) time switch and
receiver for time signal from Frankfurt, Germany (DCF77) REV17DC
Ordering
Please indicate the type number as per the "Type summary" when ordering.
Delivery
The controller is supplied with batteries.
Mechanical design
Plastic casing with an easy-to-read display and large numbers, easily accessible
operating elements, and removable base.
The housing contains the controller's electronics, DIP switches, and the relay with
potential-free changeover contact. The easily accessible battery compartment allows for
easy exchange of two 1.5 V alkaline batteries, type AA.
The base with terminal block provides lots of space to connect the wires.
Display and operating
elements

Siemens REV17 Series Specifications

General

Brand	Siemens
Model	REV17 Series
Category	Thermostat
Language	English