Siemens REV17 Series User Manual

4 / 13
Siemens Room temperature controller REV17.. CE1N2203en
Building Technologies 24.04.2008
5
Override button / party mode
In the time switch program, this button allows you to quickly change from the
active temperature level to the next and back.
Thus, you can quickly change to energy saving temperature when you leave
the apartment for a short period of time, thus saving energy.
The display indicates the change. It is valid only until the next switching time.
Activate party mode: Press the button for 3 seconds.
Party mode is available only in operating modes and . In party mode,
the controller controls to a freely selectable temperature for a freely
selectable period of time.
In party mode, symbol is displayed along with the end of party mode.
6
Minus button
Decrease values, set time, or make a selection
7
Program selection slider
Time
Day – Month – Year (2 spaces for day, month, and year)
Block of weekdays or block of weekend
1, 2, or 3 heating phases
Start
Heating phase 1
Start
Heating phase 2
Start
Heating phase 3
Setpoint
Heating phase 1
Setpoint
Heating phase 2
Setpoint
Heating phase 3
End
Heating phase 1
End
Heating phase 2
End
Heating phase 3
Energy saving temperature in the automatic mode and exception day time
switch programs
Start of absence / holiday
Temperature setpoint during absence / holiday
End of absence / holiday
Temperature setpoint at active remote control
RUN
Slider position RUN allows for closing the cover

Siemens REV17 Series Specifications

General

Brand	Siemens
Model	REV17 Series
Category	Thermostat
Language	English