Certification
6.1.3European Union (EU)
• 2014/34/EU
Directive 2014/34/EU of the European Parliament and of the Council of 26
February 2014 on the harmonisation of the laws of the Member States relating
to equipment and protective systems intended for use in potentially explosive
atmospheres (recast) Text with EEA relevance
• EN 60079-0:2012/A11:2013
Explosive Atmospheres – Part 0: Equipment – General Requirements
• EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
6.1.3 European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
• EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
• EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
• CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
The device is marked with a CE marking and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens AG. For contact
information, refer to "Contacting Siemens (Page vii)".
6.1.4 FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
RUGGEDCOM RSG907R
Installation Manual, 02/2021, C79000-G8976-1387-12
39
To Next Page
Loading...
Need help?
General