Siemens RUGGEDCOM RX1510 User Manual

Installing the Device
2.5.1Connecting High AC/DC Power
2. Connect the positive wire from the power source to the positive/live (+/L) termi-
nal on the terminal block.
3. Connect the negative wire from the power source to the neutral/negative (-/N)
terminal on the terminal block.
4. For screw terminal blocks, install the safety cover.
4
3
2
1
1
Screw
2
Safety Cover
3
Screw Terminal Block
4
RUGGEDCOM RX1510 Device
Figure2.6 Assembling the Safety Cover
5. Using a braided wire or other appropriate grounding wire, connect the ground
terminal to the chassis ground connection.
12
RUGGEDCOM RX1510
Installation Manual, 12/2019, C79000-G8976-1055-16

Siemens RUGGEDCOM RX1510 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RX1510
Category	Switch
Language	English