Siemens AG 2003, M:\Mobil\R65\S65_Penelope\am\fug\_von_itl\S65_Connectivity.fm
Setup102
VAR Language: am; VAR issue date: 040517
left page (102) of S65 FUG us, A31008-H7400-A40-1-4A19 (02.06.2004, 19:50)
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be en-
abled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec voice/fax
b
(Only if no special fax or data number
is available)
Start the required communication
program on your PC and activate the
function on the phone during the call
(the PC will take over the connec-
tion).
End transmission
End transmission with PC software
and/or press
B
.
Rec fax/data
b
Your service provider has given you a
number for telephoning and a
fax/data number.
The call is signaled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program on your PC to re-
ceive the fax/data.
To Next Page
Loading...
Need help?
General
