© Siemens AG 2020. All rights reserved
12 A5E50148832-AA, 10/2020
SIMATIC
Industrial Monitors
SIMATIC IPC477E
frameless
Product Information
Validity
This product information describes the following devices:
• SIMATIC IPC477E 22"
frameless
Article number 6AV7245-6LC00-0AA0
• SIMATIC IPC477E 24"
frameless
Article number 6AV7245-6RC00-0AA0
The term "SIMATIC IPC devices" is used in this document to refer to all devices.
The SIMATIC IPC devices are based on the SIMATIC IPC477E with capacitive multi-touch screen (standard devices) with
respect to electronics and interfaces and provide the corresponding scope of functions. You can find the description of the
IPC477E 22" Multitouch and IPC477E 24" Multitouch standard devices in the operating instruction "Betriebsanleitung IPC477E
(https://support.industry.siemens.com/cs/ww/en/view/109749206
)" on which this product information is based.
This product information describes the technical differences compared to the standard devices.
Unless otherwise described in this product information, all specifications in the underlying operating instructions, i.e.
specifications regarding hardware, software, maintenance and service, apply to the devices.
However, the information in this product information takes precedence over statements in the basic operating instructions,
the release notes and online help.
This product information contains illustrations of the described devices. The illustrations can deviate from the delivery state
of the described devices.
Overview
Product description
The figure below shows the 24" device:
Features
• Reinforced front in a frameless design
• Multi-touch technology; detection of up to 5 fingers simultaneously
• Scratch-proof, chemical-resistant and anti-glare glass front
• Intelligent operation fault recognition, e.g. palm, drops, dirt on the touch screen.
• Operation possible with thin working gloves
• LCD display, resolution 1920 x 1080 pixels
• 16 million colors
• 24 V DC power supply
To Next Page
Loading...
Need help?
General
