Configuring with Web Based Management
4.5 "Layer 2" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
233
• Status
Shows the status type of the entry in the internal port filter table. Here, "Static"
means that the VLAN was entered statically by the user.
• List of ports
Specify the use of the port. The following options are available:
– "-"
The port is not a member of the specified VLAN.
With a new definition, all ports have the identifier "-".
– M
The port is a member of the VLAN. Frames sent in this VLAN are forwarded with
the corresponding VLAN tag.
– U (uppercase)
The port is an untagged member of the VLAN. Frames sent in this VLAN are
forwarded without the VLAN tag. Frames without a VLAN tag are sent from this
port.
– u (lowercase)
The port is an untagged member of the VLAN, but the VLAN is not configured as a
port VLAN. Frames sent in this VLAN are forwarded without the VLAN tag.
– F
The port is not a member of the specified VLAN and cannot become a member of
this VLAN even if it is configured as a trunk port.
– T
This option is only displayed and cannot be selected in the WBM.
This port is a trunk port making it a member in all VLANs.
Procedure
Creating a new VLAN
1. Enter an ID in the "VLAN ID" input box.
2. Click the "Create" button. A new entry is generated in the table. As default, the boxes
have "-" entered.
3. Enter a name for the VLAN under "Name".
4. Specify the use of the port in the VLAN. If, for example, you select "M", the port is a
member of the VLAN. The frame sent in this VLAN is forwarded with the corresponding
VLAN tag.
5. Specify the mode of the device.
6. Click the "Set Values" button.
To Next Page
Loading...
Need help?
General