Technical specifications
7
7.1 Technical specifications SCALANCE XC206-2 (ST/BFOC)
The following technical specifications apply to the SCALANCE XC206-2 (ST/BFOC).
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors Quantity 6
Connector RJ-45 jack
Properties Half/full duplex, MDI‑X pinning
Transmission speed 10 / 100 Mbps
Optical connectors Quantity 2
Connector ST/BFOC socket
Properties Full duplex acc. to 100Base-FX
Transmission speed 100 Mbps
Cable type Multimode glass FO cable
Transmitter output (optical)
● Minimum
● Maximum
● -19 dBm
● -14 dBm
Receiver input
● Sensitivity min.
● Input power max.
● -32 dBm
● -3 dBm
Cable cross-section
● 50/125 μm
● 62.5/125 μm
Cable length
● 0 ... 5 km
● 0 ... 5 km
Attenuation
● ≤ 1 dB/km at 1310 nm; 1200 MHz * km
● ≤ 1 dB/km at 1310 nm; 1200 MHz * km
Diagnostics interface
Serial interface
Quantity 1
Connector RJ-11 jack
Electrical data
Power supply
1)
Rated voltage 12 to 24 VDC
Voltage range (incl. tolerance) 9.6 to 31.2 VDC Safe Extra Low Voltage
(SELV)
Design Terminal block, 4 terminals
Properties Implemented redundantly
Current consumption 12 VDC 500 mA
24 VDC 250 mA
Effective power loss 6 W
Overvoltage category CAT II
Fusing 2.5 A / 125 V
SCALANCE XC-200
Operating Instructions, 12/2017, C79000-G8976-C442-03 59
To Next Page
Loading...
Need help?
General