Description of the device
4.2 Product overview
SCALANCE XM-400
22 Operating Instructions, 09/2018, C79000-G8976-C306-08
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Components of the product
The following components are supplied with a SCALANCE XM-400:
● One IE switch with exchangeable storage medium C-PLUG
● One product DVD with documentation and software
● Securing screw for mounting on an S7 standard rail
● A 4-pin terminal block for the power supply (spring-loaded terminal)
● A 2-pin terminal block for the signaling contact (spring-loaded terminal)
● A connecting cable for the serial interface with RJ-11 plug and 9-pin D-sub female
connector
● Covers for the pluggable transceiver slots
– SCALANCE XM408-8C: 8 covers
– SCALANCE XM416-4C: 4 covers
To Next Page
Loading...
Need help?
General