Siemens SIMATIC NET SCALANCE XM-400 User Manual

Technical specifications
8.3 Technical specifications of the SCALANCE XM416-4C
SCALANCE XM-400
70 Operating Instructions, 09/2018, C79000-G8976-C306-08
8.3
Technical specifications of the SCALANCE XM416-4C
The following technical specifications apply to the SCALANCE XM416-4C.
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors
Quantity
16
Connector
RJ-45 jack
Transmission speed
10 / 100 / 1000 Mbps
Slots for SFP transceivers
Quantity
4
Connector
• SFP transceivers
(LC port)
Transmission speed
100 / 1000 Mbps
Diagnostics interface
Serial interface
Quantity
1
Connector
RJ-11 jack
Out-of-band interface
Quantity
1
Connector
RJ-45 jack
Electrical data
Power supply
Rated voltage
24 V DC
Voltage range
19.2 V DC - 28.8 V DC
Design
Terminal block, 4 terminals
Cable cross-section
• Minimum
• Maximum
• 0.75 mm
2
(18 AWG)
• 2.5 mm
2
(12 AWG)
Properties
Implemented redundantly
Fusing
3.15 A / 125 V
Maximum
incl. extender
XM416-4C
16 x RJ-45 with
1000 Mbps
Current consumption
at 24 V DC
2 A
0.7 A
Effective power loss at 24 V DC 48 W 16.8 W
Signaling contact Quantity 1
Design
Terminal block, 2 terminals
Permitted voltage range
24 V DC
Load capability
max. 100 mA
Permitted ambient conditions
Ambient temperature/
In areas according to UL508 or CSA
C22.2 No.142: Temperature of the
ambient air
During operation up to 2000 m
-40 ℃ to +70 ℃
During operation up to 3000 m
-40 ℃ to +65 ℃
During storage
-40 ℃ to +85 ℃
During transportation
-40 ℃ to +85 ℃
Relative humidity
During operation at 25 ℃
≤ 95%, no condensation

Siemens SIMATIC NET SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE XM-400
Category	Switch
Language	English