5.4 OpenPCS 7 station for multiple PCS 7 projects
Example configuration
In this example configuration, an OpenPCS 7 station is used to make OS server data from two
PCS 7 projects available. Multiple OS servers can also be used per PCS 7project.
OpenPCS 7
Station
S7-400
ET 200
S7-400
ET 200
OPC client
Plant bus
Terminal bus
Fieldbus
Plant bus
Fieldbus
PCS 7 Project BPCS 7 Project A
PCS 7 OS server PCS 7 OS server
PCS 7 OS client PCS 7 OS client
This example configuration has been released for identical PCS 7 versions in the PCS
7projects A and B.
Note
Hybrid configurations with regard to PCS 7versions are disabled.
Configuration
A SIMATIC PCS 7 station with a SPOSA application is configured in every PCS 7 project. The
SPOSA application is assigned to the OS server of the relevant PCS 7project. The same path
to the target system is configured and downloaded in both SPOSA applications.
System configurations
5.4 OpenPCS 7 station for multiple PCS 7 projects
OpenPCS 7
38 Function Manual, 05/2012, A5E02780178-02
To Next Page
Loading...
Need help?
General
