Siemens SIMODRIVE base line A User Manual

Introduction
SIMODRIVE base line A Start-Up 1-5
1.3. Order number
General SIMODRIVE base line A is delivered in 2 basic versions. They are
adapted to the machine tools with 1-axis and 2-axes control respectively.
Other versions of configurations are also available on customer’s request.
Moreover, the accessories and cables should be ordered separately by
the customers. The order numbers are as follows:
Table 1-5 Order number
No. Designation MLFB Remarks
1 V1: 1-axis module
6FC5548-0AC21-0AA0
2 V2: 2-axes module
6FC5548-0AC22-0AA0
3 Position feedback cable
6FX5002-2CJ00-1
□□0
□□:
AF – 5 m;
AH – 7 m;
BA – 10 m;
BF – 15 m;
4 Speed setpoint cable
6FX2002-3AD01-1
□□0 □□:
AB – 1 m;
AD – 3 m;
AF – 5 m;
AH – 7 m;
BA – 10 m;
BF – 15 m;
5 Encoder cable
6FX5002-2CF02-1
□□0 □□:
AF – 5 m;
BA – 10 m;
BF – 15 m;
6 Motor power cable
6FX5002-5
□A01-1□□0 □:
AF – 5 m;
BA – 10 m;
BF – 15 m;
BJ – 18 m;
CF – 25 m;
□□:
A – without brake and overall
shield;
C – without brake, with overall
shield;
B – with brake, without overall
shield;
D – with brake and overall
shield;
7 Transformer JBK3 See table 2-8.
4AU3695-0SB10-0CN2 Protection class IP00
4AU3695-0SB12-0CN2 Protection class IP23
8 SIEMENS matching
transformer (8.2kW)
4AU3695-0SB18-0CN2 Protection class IP20
9 SIEMENS filter 6SN1111-0AA01-1BA0
1FK7042-5AF71-1S□0
1FK7060-5AF71-1S□0
1FK7063-5AF71-1S□0
1FK7080-5AF71-1S□0
10 1FK7 motor
1FK7083-5AF71-1S
□0
□:
A – with key/without brake;
B – with key/with brake;
G – plain shaft/without brake;
H – plain shaft /with brake;

Siemens SIMODRIVE base line A Specifications

General

Brand	Siemens
Model	SIMODRIVE base line A
Category	Controller
Language	English