Siemens SINUMERIK ONE MCP 2400.4c User Manual

3. Press the "Glob. settings" softkey.
4. Enter the user name and the associated password for the configured
drives to be released.
5. Press the "OK" softkey.
The specifications are transferred as default setting for the Windows re‐
lease.
If you press the "Cancel" softkey, then all of the data that has not been
activated is rejected.
Managing programs
14.12 Set up drives
Milling
782 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English