Information for the Operator
7
SIP ART PS2 Manual
A5E00074631-01
NOTICE
NOTICE used without the safety alert symbol indicates a potential
situation which, if not avoided, may result in an undesireable result or
state.
.
NOTE
indicates a reference to a possible advantage when this
recommendation is followed.
0.3 Qualified Personnel
The result of unqualified intervention in the instrument or
nonobservance of the warnings given in this manual or on product
labels can be severe personal injury and/or serious material damage.
Therefore only properly qualified personnel must make changes and
settings in the instrument.
For the purpose of the safety information in this manual and on the
product labels, qualified personnel are those who
S if they are configuration personnel, are familiar with the safety
concepts of automation technology
S if they are operating personnel, have been instructed in the handling
of automation equipment and know the content of this manual
relating to operation
S if they are commissioning and/or service personnel, are trained to
repair such automation equipment and authorized to energize,
de-energize, clear ground and tag circuits and equipment according to
safety engineering standards.
S and instructed additionally in first aid
S and, in the case of ex-proof equipment, are trained, instructed or
authorized to perform work on electrical circuits of equipment
subject to explosion hazard.
To Next Page
Loading...
Need help?
General
