Siemens SITOP SEL1200 User Manual

Installation
5.2 Connection at the output
SITOP SEL1200-1400
Manual, 06.2019, A5E46496083-1-76
35
5.2 Connection at the output
(see Chapter Technical data (Page 37))
Figure 5-2 Output connection
The loads to be supplied are connected at output terminals ③ labeled OUTPUT 1, 2, 3, 4, 5,
6, 7, 8. (terminal cross-sections, see Figure Terminal data (Page 11)).
Note
The 0
V of the loads must be routed directly to the power supply using separate cables!

Siemens SITOP SEL1200 Specifications

General

Brand	Siemens
Model	SITOP SEL1200
Category	Power Supply
Language	English