149
ENGLISH
Maximum permissible engine outputs:
Silver Fox Avant/DC 485 37 kW (50 hv)
Silver Fox BR 485 45 kW (60 hv)
Silver Wolf DC/Avant/BR 510 45 kW (60 hv)
Silver Hawk BR/CC 540 75 kW (100 hv)
Silver Shark BR/CC 580 85 kW (111 hv)
Silver Eagle BR 650 130 kW (175 hv)
Silver Eagle CC 630 112 kW (150 hv)
Silver Eagle WA 650 130 kW (175 hv)
Silver Cabin 650 111 kW (150 hv)
Silver Star Cabin 650 111 kW (150 hv)
Silver Condor 730 220 kW (300 hv)
With Silver Cab models, keep the cabin doors and
hatches closed in strong winds and heavy seas.
WARNING! If you want to keep the cabin roof hatch open when un-
der way, secure it in the open position with the locking
mechanism. Failing that, a sudden movement of the
boat may cause the roof hatch to close without warn-
ing and cause injuries. Secure all the other hatches and
doors in the same way.
5.6.2 Bilge pumps and drainage
Silver boats are equipped with an automatic electric bilge pump in
the location shown in Fig. 5. When the sensor detects the presence
of water in the bilge, the pump drains it automatically. The pump is
always in standby mode irrespective of the position of the main cir-
cuit breaker provided that the battery has been installed and con-
nected. The electric bilge pump can also be operated from the
switch panel. The capacity of the bilge pump is about 45 litres/min.
Boats without a manual electric pump installed do not feature an
automatic emptying function: in this case, the pump is engaged by
a switch in the switch panel.
The electric bilge pump is operated from the switch panel described
in Section 5.8.
Carry out regular checks to ensure that the ends of the bilge pump
suction hoses are not blocked by debris.
WARNING! The bilge pump system is not designed for controlling
leaks resulting from running aground or other such
damage.
CAUTION! Check the bilge pump regularly for correct operation.
Remove any debris from the pump suction inlets.
To Next Page
Loading...
Need help?
General
