Silvercrest SBDB 5 A1 User Manual

GB
│
IE
│
NI
│
13 ■
SBDB 5 A1
DAB+ radio operation (DAB)
Automatic station scan (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the DAB+ radio stations found as a station list.
♦ This device must be switched on. If necessary, briefly press the
button2
to switch on the device.
♦ If necessary, briefly press the SOURCE/
button
4 several times until the
DAB+ radio mode is shown on the display1.
♦ Briefly press the ENTER/SCAN button 3 to start the automatic
station scan with station saving. The display 1 now shows the message
Scanning... DAB and the number of found stations. The scan progress is dis-
played as a progress bar. The DAB+ radio stations found are automatically
stored in the station list on order of increasing frequency. When the scan is
finished, the first station in the station list is automatically played back.
NOTE
► An automatic station scan with station saving may overwrite an existing
station list.
Selecting stations
♦ Press the TUNE+ 9 or TUNE− button 8 to select a DAB+ radio station
from the station list. After approx. 2 seconds, the displayed station is auto-
matically played back.
Saving stations manually
♦ Press the TUNE+ 9 or TUNE− button 8 to select a DAB+ radio station
from the station list.
♦ Press the PRESET
button 7. The display 1 shows the preset position with
the last selected radio station (if radio stations have already been stored).
If no radio stations have yet been stored, the display 1 shows Preset 1
empty.
♦ Press the TUNE+ 9 or TUNE− button 8 to select the desired preset.
♦ Press the ENTER/SCAN button3 to store the station in the selected
preset space. The preset space of the stored station is shown in the upper
right corner of the display 1 (e.g. P1 for preset 1).
NOTE
► Any previously stored stations will be overwritten.

Silvercrest SBDB 5 A1 Specifications

General

Brand	Silvercrest
Model	SBDB 5 A1
Category	Radio
Language	English