Silvercrest SBDB 5 A1 User Manual

■ 22
│
GB
│
IE
│
NI
SBDB 5 A1
12h/24h display
NOTE
► If the 12h display is set, PM appears on the bottom left of the display
1
from 12 noon until 11:59 at night. From midnight to 11:59 AM, AM
appears on the display
1.
► The default setting for the time is the 24h display.
♦ In the Settings menu, press the TUNE+
9 or TUNE− button 8 repeatedly
until Time setup appears on the display 1.
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.
♦ Press the TUNE+ 9 or TUNE− button 8 until Set 12/24 hour appears
on the display
1.
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.
♦ Press the TUNE+ 9 or TUNE− button 8 to switch between the 12 hour
setting (Set 12 hour) or the 24 hour setting (Set 24 hour).
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.
Automatic update
The Auto Update function allows you to set whether the date and time are set
automatically via the radio stations' RDS (Radio Data System) signal or manually.
NOTE
► If From radio is set, the date and time are automatically set via the RDS
signal from the radio stations.
► If No update is set, the date and time are not set automatically, but must
be set manually.
► The default setting for the Automatic Update function is From radio.
♦ In the Settings menu, press the TUNE+
9 or TUNE− button 8 repeatedly
until Time setup appears on the display 1.
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.
♦ Press the TUNE+ 9 or TUNE− button 8 until Auto Update appears on
the display 1.
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.
♦ Press the TUNE+
9 or TUNE− button 8 select either From radio or
No update.
♦ Press the
ENTER/SCANbutton 3 to confirm the selection.

Silvercrest SBDB 5 A1 Specifications

General

Brand	Silvercrest
Model	SBDB 5 A1
Category	Radio
Language	English