16 US-EN
Button Function
‒ Press and hold for 2 seconds to disconnect the existing
Bluetooth
®
connection and the speaker activates pairing
mode.
‒ Briefly press to pair two units before they connect to an
external Bluetooth
®
playback device. A signal tone will be
heard if pairing has been carried out successfully. The two
speakers now work as stereo speakers.
‒ Briefly press again to break the current TWS connection, a
signal tone will be heard.
‒ Press briefly during playback to increase the volume, one
beep will sound when the maximum volume has been
reached.
‒ Press and hold during playback to skip forwards to the next
song in the playlist.
‒ Press briefly during playback to decrease the volume,
one beep will sound when the minimum volume has been
reached.
‒ Press and hold during playback to skip backwards to the
beginning of song & press and hold again backwards to the
previous song in the playlist.
NOTE: When you change the volume on the product the volume on the
playback device will also so change. This volume synchronisation function
depends on the operating system and the brand of your playback device.
To Next Page
Loading...
Need help?
General
