17 US-EN
Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack
1
has a higher priority over
a Bluetooth
®
connection.
Once the AUX cable
13
is plugged into the AUX-in jack
1
, the
Bluetooth
®
wireless connection will be disconnected. Music playback is
now switched to AUX-in only and the LED
5
lights up green.
If the product is off, press and hold the
button
8
until the signal LED
5
lights up green and a signal tone sequence sounds.
Switch the playback device on and start playback.
Adjust the volume on the playback device to the highest possible volume
then adjust the volume on the product using the
9
and
7
buttons.
Switching between AUX-in and Bluetooth
®
connections
To resume music playback via Bluetooth
®
connection unplug the AUX
cable
13
from the AUX-in jack
1
. The product will then search for the
previously paired playback device (if any) and re-establish the Bluetooth
®
connection automatically.
1
13
1
To Next Page
Loading...
Need help?
General
