■ 8 │ GB│IE│NI│CY
SED 400 A1
Cable retainer
There is a cable retainer on the base of the appliance. This retainer allows
you to adjust the length of the cable to your requirements.
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the cable through the corresponding gap in
the rear of the appliance base
for the sake of stability.
NOTE
► Always wrap the power cable around the cable retainer
in a clockwise
direction. This reduces the length of the cable to a minimum, allowing you
to guide the cable through the gap in the appliance base .
Preparing eggs
1) Pick a hole in the bottom of the egg with the egg pick . This allows the air
inside the egg to dissipate as it expands during boiling. It prevents the shell
from bursting open.
2) Place up to 7 eggs on the cooking insert
with the picked side up.
3) Fill the measuring cup
up to the MAX marking with tap water and tip this
water into the cooking bowl .
4) Place the cooking insert
into the cooking bowl and place the lid on top.
Boiling all eggs to the same firmness
NOTE
► The preprogrammed cooking times relate to average-sized eggs (size M/L)
at a temperature of around 7°C (refrigerator temperature).
1) Turn the control switch
to the position that corresponds to the desired egg
firmness (see the symbols to the right of the control):
Symbol Meaning
soft-boiled eggs
medium-boiled eggs
hard-boiled eggs
To Next Page
Need help?
General
