Silvercrest SIKP 2000 D1 User Manual

SilverCrest SIKP 2000 D1
22 - English
9. Troubleshooting
If your induction hotplate does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Guarantee information" on page 24).
Risk of electric shock!
Never try to repair the device yourself.
Problem Possible causes Remed
y
Induction hotplate
not working
Mains cable not connected Connect the mains cable to a live wall socket.
Child lock activated. Press and hold the button (8) for 3 seconds to
deactivate the child lock.
Heating zone (2)
not getting hot
No pan on the heating
zone (2)
Place a pan on the heating zone (2).
Cookware not suitable for
induction
Only use cookware which is suitable for
induction hotplates.
Error E0 is shown
on the display (7)
No pan on the heating
zone (2)
Place a pan on the heating zone (2).
Cookware not suitable for
induction
Only use cookware which is suitable for
induction hotplates.
Cookware is too small in
diameter or not standing
centrally on the heating
zone (2).
Only use cookware with a diameter of between
16 and 26 cm and place it on the centre of the
heating zone (2).
Error E3 is shown
on the display (7)
Hotplate temperature too high Wait a few minutes until the heating zone (2)
has cooled down.
Empty pan Fill the pan with food.
Error E6 is shown
on the display (7)
Empty pan or cooling fan
defective
Fill the pan with food. If the pan was filled and
error E6 is still displayed, the cooling fan may
be defective. In this case, contact our hotline.
See the "Warranty information" on page 24.
Error E1, E2, E4,
E5, E7, E8 or Eb is
shown on the
display (7)
Technical fault Contact our hotline. See the "Guarantee
information" on page 24.

Silvercrest SIKP 2000 D1 Specifications

General

Brand	Silvercrest
Model	SIKP 2000 D1
Category	Hob
Language	English