GB/IE 32
Connect the USB type C plug of the USB cable
7
with the
USB type C input port
2
of the power bank
6
.
Connect the other end of the USB cable
7
(USB Type
A) to a USB power supply (not included in the scope of
delivery) (see fig. A).
The LED indicator for battery capacity
9
shows you the
approximate charge level of the internal battery via 4
LED lights. After approx. 30 seconds the LED indicator
9
goes out, you can light up the LED indicator
9
again by
pressing the ON / OFF button
5
.
LED indicator
9
status
Power bank capacity level
1 LED flash 0 - 25 %
1 LED light up, 1 LED flash 25 - 50 %
2 LED light up, 1 LED flash 50 - 75 %
3 LED light up, 1 LED flash 75 - 100 %
4 LED light up 100%
* This is approx percentage of power bank capacity but not
actual measurement.
WARNING! Do not connect any device to be charged
to power bank as long as the power bank is charging. Remove
the charging cable from the power bank when it is fully
charged.
Checking the battery status
You can check the battery status via the LED indicator
9
of
the power bank
6
at anytime.
To Next Page
Loading...
Need help?
General
