Simplicity S210 User Manual

21
BUILT-IN STITCHES – “N” NORMAL RANGE
ATTACHING FLAT ELASTIC
Place elastic and fabric under the presser foot.
Take a few stitches to anchor the elastic. Adjust the
width of the stitch to the width of the elastic.
Zigzag over the elastic, stretching the elastic in front of
the presser foot as you sew [Fig. 1].
SEAMING NYLON TRICOT
Use the double action stitch for quick and easy, one-step
seaming and finishing on tricot and other soft fabrics.
For 1/4” seam allowances, guide the fabric so the right
swing of the stitch forms just inside the edge of the fabric
[Fig. 2].
F
or 1/2” to 5/8” seam allowances, sew [Fig. 3], then trim
the excess fabric close to the stitc
hing [Fig. 4].
ENCASING ELASTIC
Create casings for 1/8” narrow elastic in minutes for
waistbands, cuffs, and craft items.
Place the fabric wrong side up under the presser foot.
Insert the elastic through the front opening of the presser
foot, over the front and under the back. Leave a 1/2” tail
of elastic behind the foot. Begin sewing being careful not
to stitch the elastic [Fig. 5]. When sewing is complete,
pull the ends of the elastic until the desired amount of
fullness is obtained [Fig. 6]. Secure the ends of the elastic
with a straight stitch before sewing them into a seam.
STITCH “C” - THREE-STEP ZIGZAG
STITCH “D” - DOUBLE ACTION
Fig. 1
Fi
g. 2
Fig. 3
Fig. 4
Fig. 5
RANGE STITCH WIDTH LENGTH FOOT
N C 3-5 2-3 All-purpose
RANGE STITCH WIDTH LENGTH FOOT
N D 1 1 All-purpose
RANGE STITCH WIDTH LENGTH FOOT
N D 5 4 All-purpose
Fig. 6
Elastic casing

Simplicity S210 Specifications

General

Brand	Simplicity
Model	S210
Category	Sewing Machine
Language	English