23
Problem Solving Guide
Full bag or clog indicator light
The full bag indicator light is designed to
show when the bag is full or when there is a
clog in the vacuum.
The system measures airflow and alerts the
user when airflow is significantly reduced—
most commonly from full bags and clogs.
The light could also come on when
vacuuming fine powders such as flour or
drywall dust. These materials can quickly
block the bag pores, significantly reducing
airflow before the bag appears to be full.
The vacuum bag should still be changed.
Change filter indicator light
The filters on your Synergy vacuum should
be replaced after 25 hours of operation.
The Synergy is equipped with a filter clock
to monitor the actual hours of operation
and will illuminate the change filter indicator
light on the nozzle of your vacuum when 25
hours of operation have elapsed.
When the filters are replaced, reset the
filter clock (while the vacuum is running) by
removing cap and pressing the reset button
when replacing filter. The change filter
indicator light will once again only illuminate
after the next 25 hours of operation.
Blue Warning Light
Filter Clock
Full Bag
Yellow Warning Light
Filter Clock
Full Bag
To Next Page
Loading...
Need help?
General
