SimpliSafe Water Sensor User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
10
Install your 105 Decibel Sirens
•Remove the battery activation strip.
•Indoor Installation: Adhere Siren in a central
location within 100 ft. of the Base Station.
•Outdoor Installation: Install within 100 ft of
your Base Station. Slip the backing bracket
off of your Siren and use the included screws
to mount the backing under an eve or an
awning. Then slide the Siren back onto its
backing.
Helpful Information about your Siren
•Be cautious when testing your Siren indoors. Prolonged
exposure to a 105 decibel siren can cause hearing damage.
We recommend you use ear plugs or stand 5 feet away.
•When your alarm system has been triggered, the Siren will
beep during the entry delay peroid. You can disable the
entry delay beeps by removing the backing and pressing the
programming button 5 times. You will hear one long tone to
confirm the beeps have been disabled.
Tip: Install in a cental location.

SimpliSafe Water Sensor Specifications

General

Brand	SimpliSafe
Model	Water Sensor
Category	Security System
Language	English