SimpliSafe Water Sensor User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
11
visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
Install your Carbon Monoxide Detector
•Remove the battery activation strip.
•Install the CO detector near your
bedrooms and any other sleeping areas.
•Separate the mounting bracket from the
back of the CO detector by rotating it
counter clockwise.
•Mount the bracket to your wall or ceiling using the included
screws and wall anchors.
•Push the CO Detector against the mounting bracket and
rotate it clockwise until it snaps into place. Pull gently on
the detector to make sure it’s securely attached.
!
Mounting Bracket
Do not install near your
furnace, stove, fireplace,
kitchen or garage.
Make sure to place a CO
detector near your sleeping
areas. For maximum
protection place one on
each level of your home.

SimpliSafe Water Sensor Specifications

General

Brand	SimpliSafe
Model	Water Sensor
Category	Security System
Language	English