SimpliSafe Water Sensor User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
6
Install your Motion Sensors
•Remove the battery activation strip.
•Place the Motion Sensor on a shelf or
adhere it to a wall, approximately 4 to 5 feet
off the ground.
Helpful Information about your Motion Sensor
•If you have large pets, weighing more than 30 lbs, you can
install your motion sensors upside down. This way they’ll
ignore any movement underneath them.
•By default, all Motion Sensors will be active in the Away mode
only. Put the alarm in the Home mode and you can move
freely about your home without setting off an alarm.
Tip: Your Motion Sensor looks
straight ahead and 90° to the left
and right. It also looks downward at
a 45° angle. Mount it in a corner for
maximum coverage of your room.
•Avoid placing the Sensor near a heater, air conditioner,
lamp, or electronics (such as a WiFi router).
•When placed 5 feet off the ground the Motion Sensor
should not detect pets under 30 pounds, as long as the pet
cannot get within 5 feet of it.

SimpliSafe Water Sensor Specifications

General

Brand	SimpliSafe
Model	Water Sensor
Category	Security System
Language	English