SimpliSafe Wireless Keypad User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
17
3. Use Your System
Modes
Your alarm system has 3 modes: Away,
Home and Off. Turn your alarm on by
putting it in Away or Home mode. Turn
your alarm off by putting it in Off mode.
Mode buttons
Mode icons
Away Mode
Use this mode when you are leaving.
All of your sensors, including Motion
Sensors will be active.
•Close all doors and windows.
•Press
away
on your Keychain Remote
or Keypad.
•You have 60 seconds to exit before
the alarm is active.
Tip: To cancel during the exit delay,
simply press
off
.
Use the same method to turn off your alarm, whether it is in the home or away mode.
•Press
off
on your Keychain Remote OR
•Press
off
, followed by your 4 digit PIN, on the Keypad.
If you make a mistake entering your PIN, press
delete
to back up or
off
to start over.
If a sensor is triggered, there will be a 30 second entry delay before the alarm siren
sounds and the Emergency Dispatch Service is notified.
Tip: You can adjust advanced settings like the entry and exit delays by using the
SimpliSafe Easy Setup Wizard, described on the cover of this manual.
Home Mode
Use this mode when you are staying
home. All of your sensors will be active,
except for Motion Sensors which will not
be active.
•Close all doors and windows.
•Press
home
on your Keypad.
•Entry Sensors, Glassbreak Sensors, and
Panic Buttons will be active immediately.
Motion Sensors will not be active – you
can move freely around your home.
A. Turn your alarm ON
B. Turn your alarm OFF
off away home

SimpliSafe Wireless Keypad Specifications

General

Brand	SimpliSafe
Model	Wireless Keypad
Category	Security System
Language	English