SimpliSafe Wireless Keypad User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistancevisit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
5
Install your Keypads
•Remove the battery activation strip.
•Adhesive tape has already been installed
on the back of the Keypad – just peel and
stick. If you make a mistake, see “How do
I move a sensor?” on page 19.
•Adhere the Keypad to the wall by your
main entrance.
Helpful information about your Keypad
•Your default PIN is 1234. We’ll help you change that when we
personalize your system in just a few minutes.
Tip: Your alarm system has 3 modes:
Away, Home and Off. Turn your alarm on
by putting it in Away or Home mode. Turn
your alarm off by putting it in Off mode.
Mode buttons
Mode icons
off away home
Tip: before applying the adhesive tape make
sure the surface is clean and dry.
Tip: for the most reliable wireless connection,
install the Keypad between 10 and 100 feet of
the Base Station.

SimpliSafe Wireless Keypad Specifications

General

Brand	SimpliSafe
Model	Wireless Keypad
Category	Security System
Language	English