SimpliSafe Wireless Keypad User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
4
1. Install your Security System: Base Station
•Set up your Base Station in a central
location in your house. Tip: don’t install it
on the floor.
•Plug the Base Station into a power outlet
using the included power cord.
Helpful Information about your Base Station
•It’s the control center of your system, communicating with
all of your wireless sensors.
•It has a built in cellular alarm transmitter that will send us
your alarm signals when you activate your SimpliSafe alarm
monitoring service (see page 15).
•Your Base Station’s blue light has 4 modes:
a) Off when your system is off
b) Glowing steady when your system is armed
c) Flashing when there is an error or warning message on the
Keypad
d) In test mode it will glow bright blue, when your Base Station has
good cellular reception.
Tip: make sure the power outlet
is not controlled by a light switch
which could accidentally cut
power to the Base Station

SimpliSafe Wireless Keypad Specifications

General

Brand	SimpliSafe
Model	Wireless Keypad
Category	Security System
Language	English