Free motion darning, stippling
0
1
2
3
4
27
1 2
* The darning foot is an optional accessory not included with
your machine. (1)
Install the darning plate. (2)
For darning, first sew around the edge of the hole (to secure the
threads). (5)
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Sew a straight or zigzag stitch following your design line. Using
the optional darning foot will help guide you as you sew.
Set the machine as illustrated.
Remove the presser foot clamp. (3)
Attach the darning foot to the presser foot holder. The lever (a)
should be behind the needle clamp screw (b). Press the darning
foot on firmly from behind with your index finger and tighten the
screw (c). (4)
First row: Always work from left to right. Turn work by 1/4 and
oversew. A darning hoop is recommended for easier sewing
and better results.
Note:
3
a
b
c
5
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
