Singer 4411 User Manual

38
4
3
1
2
Move the drop feed control to right side to lower the feed
dogs. (1)
Change the all purpose foot to the button sewing foot. (2)
Set the stitch length to "0".
Set the machine for zig-zag stitch, then set the width to
number "3" - "6". Turn the handwheel to check that the
needle goes cleanly into the left and right holes of the button.
Adjust the stitch width, as needed, according to the distance
between the holes of the button. Slowly sew on the button
with about 10 stitches.
Raise the needle out of the fabric. Set the machine for straight
If a shank is required, place a darning needle on top of the
button and sew. For buttons with 4 holes, sew through the
front two holes first, push the work forward and then sew
through the back two holes.
Place the button and fabric under the Button Sewing foot, as
illustrated in (3).
stitch again, then sew a few securing stitches to finish.
L R
a
b
Sewing on Buttons
EN
a
b

Singer 4411 Specifications

General

Stitch Applications	69
Built-in Stitches	11
Stitch Length	4 mm
Motor	60% stronger motor
Needle Positions	3
Free Arm	Yes
Weight	14.5 lbs
Dimensions	15.5 x 6.25 x 12 inches
Type	Mechanical
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Drop Feed	Yes
Heavy Duty Metal Frame	Yes
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Button Sewing Foot
Voltage	110V
Warranty	25-year limited
Stitch Width	5 mm
Sewing Speed	1100 stitches per minute
Buttonhole Styles	1-step