Singer 7442 User Manual

10
Power line cord
Cordon
Cordón de la linea eléctrica
Set power/light switch at
“OFF”
1
3
Foot control
Rhéostat
Control por pedal
Power/light switch “OFF”
Interrupteur moteur/lumière “OFF”
Interruptor corriente/luz “OFF”
Power/light switch “ON”
Interrupteur moteur/lumière “ON”
Interruptor corriente/luz “ON”
Machine socket
2
SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into
the cord socket (1) and your wall outlet (2) as
illustrated.
Connect the foot control plug (3) into the
machine socket
.
NOTE: When foot control is disconnected, the
machine will not operate.
POWER/LIGHT SWITCH
Your machine will not operate until the power/
light switch is turned on. The same switch
controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
Mettez l’interrupteur moteur/
lumière sur “OFF”.
Poner el Interruptor de corriente/
luz de velocidad en “OFF”
Connecteur de la
machine
Conector de la máquina
Always disconnect the machine from power
supply by removing the plug from the wall-outlet.
Pin plug
Butée
Pasador

Singer 7442 Specifications

General

Stitch Patterns	30
Automatic Needle Threader	Yes
Drop Feed	Yes
Free Arm	Yes
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Brand	Singer
Model	7442
Needle Positions	Variable
Presser Feet Included	4