11
A
Auxiliary Spool Pin
The auxiliary spool pin is used when winding a bobbin
thread from a second spool of thread or for a second
spool when sewing with a twin needle (Twin needle not
included). It can also be used for many specialty threads.
Insert the auxiliary spool pin onto the end of the bobbin
winding spindle (A). Aling the notch (B) with the spring
(C) on the bobbin winding spindle. Install the second
thread spool onto the auxiliary spool pin.
Auxiliary spool pin.
B
C
B
A
C
D
Bobbin Winding
1. Place the thread spool on the spool pin in horizontal
position. Slide a spool cap tightly against the spool.
2. Place the thread into the thread guide (A) from front
to back. Pull the thread counter-clockwise around
the bobbin winder tension disc (B).
3. Thread through the hole in the bobbin (C) from the
inside to the outside.
4. Place an empty bobbin on the bobbin winding
spindle.
5. Push the bobbin winding spindle to the right to
wind.
The letters "SP" ash on the LED display (D).
Press the foot control to wind the bobbin.
When the bobbin is full, release the foot control.
Push the bobbin winding spindle to the left. Remove
the bobbin and cut the thread.
To Next Page
Loading...
Need help?
General
