Threading the machine
Like all sewing machine that produce what is called a “lockstitch,” your sewing
machine sews with two threads. The upper thread comes from the spool and is
threaded through the eye of the needle. The lower thread comes from the bobbin,
which is simply a small spool that you wind yourself, using the machine. On the
Fashion Mate machine it is best to wind the bobbin before threading the needle.
the bobbin thread
REMOVING THE BOBBIN
1 Turn hand wheel toward you until
needle is at its highest position.
2 Open slide plate.
3 Reach down with left hand, open
bobbin case latch, and lift out
bobbin case.
4 Release latch and remove bobbin
from bobbin case.
WINDING THE BOBBIN
1 Stop motion of needle by loose-
ning stop-motion screw. Hold
hand wheel with left hand while
turning stop-motion screw toward
you with right hand.
5
To Next Page
Loading...
Need help?
General
