Presser Feet
All Purpose Foot (T)
(attached on the machine upon delivery)
This foot is used for general sewing on most types of fabric. The bottom of the foot is flat, so that the
fabric is held down firmly against the feed teeth while sewing. It also has a wide slot so that the needle
can move from left to right, depending on which stitch you sew.
The foot has a “lock in place” button, the button is pushed to lock the foot in horizontal position when
sewing over thick seams (see page 23).
Blind Hem Foot (F)
The Blind Hem Foot is used for sewing blind hems in fashions and home decor. There is an adjustable
guide with an extension at the front, used to guide the fold of the hem while stitching.
Zipper Foot (I)
This foot is used for inserting zippers. Attach the foot to the presser foot holder on either side of the
foot, depending on which side of the zipper is being sewn. The Zipper Foot can also be used to create
and insert piping.
One–Step Buttonhole Foot (D)
This foot allows you to make perfectly sized buttonholes for your button. It has a space at the back for
a button, used to set the size of the buttonhole. The machine will automatically sew a buttonhole to fit
that button size.
Satin Stitch Foot (A)
This foot is used for satin stitches and other decorative stitches.
Optional Accessories
Additional optional accessories are available for your machine. Visit the SINGER® website for more information.
4 – Introduction
English
To Next Page
Loading...
Need help?
General
